tiempo: 2023-01-09
multi-turn (standard: 5-turn, 10-turn)
hybrid
bushingmount&servomount
standard resistance range
10-turn
max. practical resistance value
2k,5k,10k,20k,50k,100k(ω)
total resistance tolerance
standard class ±10%(k), precision class±5%(j)
independent linearity tolerance
standard class ±0.25%, precision class±0.1%
resolution
essentially infinite
output smoothness
contact resistance variation
<3%c.r.v.
power rating
2.0w
electrical travel
3600°±5°
mechanical travel
3600°
insulation resistance
>100mω(1000v.d.c.)
dielectric strength
1 minute at 1,000v.a.c.
starting torque
<5mn•m(50gf•cm)
stopper strength
approx.0.35n•m(3.5kgf•cm)
appropriate fastening torque of the nut
±100p.p.m./℃
resistance temperature coefficient
<3.0n•m(30kgf•cm) (in case of panel thickness with over 2.5mm, the rotating torque may become heavier)
mass
approx.28g(bushingmount type)、approx.30g(servomount type)
special turns
3-turn type
special shaft type
shaft with front and rear extension (rear shaft with 6mm dia. and 15mm length), special shaft dia. (φ 3mm,φ 3.175mm,φ 4mm,φ 5mm,φ 6.35mm), special machining on the shaft
special housing case
simple sealed housing
special torque
with high torque
special accessories
slipping-clutch incorporated type(20mn・m ~ 60mn・m)
special tap
extra tap (available up to 1 tap only for 10-turn)
special gangs
multi-ganged (available up to 10 gangs)