tiempo: 2023-01-09
multi-turn (standard: 3-turn, 5-turn, 10-turn, 15-turn, 20-turn)
wirewound
bushingmount&servomount
standard number of turns
10-turn
standard resistance range
50ω~100kω
max. practical resistance value
200kω
total resistance tolerance
standard class ±3%(h) [±5% (j) in case of within 1kω ], precision class ±1%(f) [in the pot. with a single-wire resistive element, the precision class should read ±2% (g)]
independent linearity tolerance
standard class ±0.3%, precision class ±0.1%, (within 5kω) (±0.15%)
power rating
5.0w
noise
<100ωe.n.r.
electrical travel
3600°±5°
mechanical travel
3600°
insulation resistance
>100mω(1000v.d.c.)
dielectric strength
1 minute at 1,000v.a.c.
starting torque
<20mn•m(200gf•cm)(bushingmount type)、<10mn•m(100gf•cm)(servomount type)
stopper strength
approx.0.9n•m(9kgf•cm)
resistance temperature coefficient
±20p.p.m./℃
mass
approx.120g
special turns
30-turn type (s46hd-30)
special shaft type
special machining on the shaft, shaft with front and rear extension (in case of bushingmount type, rear shaft with 6mm dia. and 28mm length together with the bushing of m9x10mm and in case of servomount type, rear shaft with 6mm dia. and 15mm length), shaft dia. (φ 6.35mm) & bushing with inch dimension
special housing case
simple sealed housing
special accessories
with limit-switches
special model
oil-filled type (of46hd)
special gangs
multi-ganged (available up 2 gangs)