вернуться: 2023-01-09
magnetic rotary sensor (hall effect)
linear potentiometers/linear sensors
with front and rear extended
current consumption
single output: max. 15ma, dual output/dual independent output: max. 30ma
independent linearity tolerance
±0.5%fs
mechanical stroke (ms)
approx. 34mm
electrical stroke
30mm±0.5mm
applied voltage
5v±10%d.c.
load resistance
>10kω
effective output
10%±3%~90%±3%vin
output temperature characteristics
within ±0.8% vout・fs
operating temperature range
- 40°c~ 105°c
storage temperature range
- 40°c~ 105°c
friction
<0.6n(60gf)
stopper strength
approx. 20n(2kgf)
mass
approx. 44g
thermal shock
5 cycles - 40°c~ 105°c
exposure at low temperature
24 hours at - 40°c
exposure at high temperature
1,000 hours at 105°c
vibration
10~2000hz 196m/s2 12小时
shock
980m/s2 6ms(18 times)
life expectancy
approx. 50,000,000 reciprocating motions
ems tolerance
100v/m(80mhz~1ghz 1khz sinwave80% amplitude modulation)
esd tolerance
±8kv contact discharge /±15kv aerial discharge (based on iec 61000-4-2)
special shaft type
special machining on the shaft
with spring return device
spring return device is mounted on the outer shaft and the shaft length is changed. also, the expected longevity would be around 10,000,000 reciprocating motions.
special output
pwm, cross, parallel, dual independent output
special mode
low current consumption in slow mode