вернуться: 2023-01-09
multi-turn (standard: 5-turn, 10-turn)
wirewound
bushingmount&servomount
standard number of turns
10-turn
standard resistance range
100ω~100kω
max. practical resistance value
200kω
total resistance tolerance
standard class ±3%(h), precision class ±1%(f)
independent linearity tolerance
standard class ±0.2%, precision class ±0.1%, (within 5kω) (±0.15%)
power rating
2.0w
noise
<100ωe.n.r.
electrical travel
3600°±5°
mechanical travel
3600°
insulation resistance
>100mω(1000v.d.c.)
dielectric strength
1 minute at 1,000v.a.c.
starting torque
<8mn•m(80gf•cm)(bushingmount type)、<5mn•m(50gf•cm)(servomount type)
stopper strength
approx.0.9n•m(9kgf•cm)
resistance temperature coefficient
±20p.p.m./℃
mass
approx.60g
special turns
3-turn type (s25hp-3), 15-turn type (s25hp-15), 20-turn type (s25hp-20)
special resistance value
lower resistance (10ω , 20ω , 50ω )
special shaft type
shaft with front and rear extension (rear shaft with 3mm dia. and 10mm length),special machining on the shaft, shaft dia. (φ 3.175mm,φ 6.35mm) & bushing with inch dimension
special adaptor
with a limit-switch adaptor
special taps
extra taps (available up to 5 taps)
special gangs
multi-ganged (available up to 2 gangs)